Camp On Busy; Receiving A Call - Samsung SP-R6100 User Manual

Camp On Busy

(Available only when you have more than one handset)
This feature allows your handset to wait for connection to the
telephone line currently engaged by another handset. Your
handset rings when the telephone line becomes free.
1. You hear a short busy tone if you open the flip cover or
press key while another handset engages the
telephone line.
The display shows the handset number currently engaging
the line. Your handset is automatically camped on the line.
N o t e : To cancel this feature, press
b e f o re the line is free. The handset re t u rns to
Standby mode.
2. Your handset rings and the window displays FREE when
the line becomes free.
3. Press key to engage the line while the handset rings.
Notes:
• If an incoming call arrives while your handset rings to tell
you the line is free, the 'Camp On Busy' feature is automati-
cally cancelled and an incoming ring sounds.
• Several handsets can be camped on the busy line in
c h ronological ord e r. When the line becomes available to
you, the LCD window displays F R E E, and other handsets will
display your handset number following the word B U S Y.
• When your handset rings and the window displays F R E E,
p ress the key within 10 seconds. Otherwise, the handset
re t u rns to the Standby mode.
20
General Functions
key any time

Receiving a Call

When somebody calls you, the phone rings. Also, the
in the middle of your handset's display and the telephone
lamp on the left of the base will start to blink.
The caller's phone number will be displayed if the telephone
network has transmitted the necessary information.
1. If the handset is on the base, pick up the handset and
speak. Or
If the handset is out of the base, open the flip cover and
speak, press the or
If the handset is in the Standby mode with the flip cover
open, press key.
N o t e: key and
onds after the flip has been opened to receive a call
in order to prevent the phone from being disengaged.
2. To end the call, close the flip cover or press
Place the handset in the base unit.
N o t e : If you set the 'Ring Delay Time' feature, you can turn
the handset ringer off for the specified time when a call
comes in and other handsets are ringing. Refer to 'Ring
Delay Time' on page 48.
keys on the side of the phone. Or
key will not work for three sec-
key. Or
General Functions
icon
21