Samsung SyncMaster 753Ms, 753v, 750s, 753s Owner's Manual page 15

1. Setup-General
Connecting
Your Monitor
Installing the
Monitor Driver
Base Installation
1. Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
2. Connect the end of the signal cable to your computer's video port(video board, video card or
graphics card).
3. If you are using a Macintosh computer, connect the cable to a Macintosh adapter, and set the
pins on your adapter(Adapter not included). A PC-compatible computer does not need an
adapter.
4. Turn on your computer and monitor. If your monitor displays an image, installation is complete.
2. Setup-For Multimedia model
1. Setup-General | 2. Setup-For Multimedia model
SyncMaster 753Ms
Main > Setup > Connecting Your Monitor
| 3. Multimedia Speaker Stand