Samsung SyncMaster 181T Owner's Manual page 14

Connecting
Your Monitor
Installing the
Monitor Driver
Installing VESA
compliant mounting
1. Connect the DC Adapter for your monitor to the power port on the back of the monitor.
2. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.
3. If you are using a Macintosh computer, connect the cable to a Macintosh adapter, and set the
pins on your adapter(Adapter not included). A PC-compatible computer does not need an
adapter.
4. Connect the DVI Cable to the DVI Port on the back of your Monitor.
Note: Turn on your computer and monitor. If your monitor displays an image, installation is complete.
SyncMaster 191T