Using The C-Mos Imager (Imager Models - Casio IT -G500 Series User Manual

Using the C-MOS Imager (Imager Models)
I, Turn on the Handheld Term inn I, position Its C-MOS Imager reader port
n~ar
the bar
code or 20 code, and then press the trigger key.
2. The Handheld Terminal reads the code by emitting laser and red lights.
Indicator
2
(read opemlion indicator lamp) lights in green when the reading is
successful.
Rar code and stacked 2D code Rending Guide
When you press the trigger key, LEOs iu the Handheld Terminal emit laser and red
lights. Align the laser frame with the center of the har code or 20 code you are trying
to read. Take particular care nliguir'g the light when there arc other bar codes nearby.
When reading a bar code in large size, adjust the position of the Handheld Terminal
so that the entire code is enclosed within the laser frame. For small size, move the
Handheld Terminal closer to it.
Important!
• If
you have 1>roblem not properly r·eading a code, change the angle and/or th e
distance between the code nnd tile llandhc. l d Tca ·mlnnl and try rendin g It Rgnln.
• A bar codo can be r·cad from
n
distance of SOmm to 400mm, nnd a
stncl<cd
2D
code can be read from a dlstnnec of 65mm to 260mm anclmntl'lx 2D code can be
read
from a
distance
of 55mm
to
195mm. The
actuala·cadlng dlstnnce
depends
on
the
symbology
and the resolution.
• Note that a speclala·ender nppUcntion Is reqult·ed to read bar codes nnd 2D
codes.
• Fingca ·prluts, dnst, dirt, or stnlu on the C-MOS Tmagca · a ·ender port can cause
abnormal
reading. Should the •·eadcr
port
become dirty, wipe it clean with
11
soft
and dry cloth.
E-31