Table of Contents Editorial Record Preface Chapter 1. Overview Of The Products 1.1. Features 1.2. Available Models 1.3. Options 1.4. Accessories 1.5. External Views 1.5.1. IT-600 1.5.2. HA-D60IO 1.5.3. HA-D32DCHG (Dual Battery Charger) 1.5.4. HA-D30CHG (Cradle-type Charger) 1.5.5. HA-D50BN (Laser Redirection Attachment) 1.5.6.
Page 3
CASIO Computer Co., Ltd. in Tokyo Japan. Information in this document is subject to change without advance notice. CASIO Computer Co., Ltd. makes no representations or warranties with respect to the contents or use of this manual and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose.
® • A wide range of wireless communications via either Bluetooth or WLAN (IEEE802.11b/g) • Rugged casing to allow use in extreme environments • Original CASIO digital technology enables capturing of images in all light conditions. ® ® • Microsoft Windows CE 5.0 offers reliable and real time capabilities.
Aiming to a full compliance with the “Restriction of the use of certain Hazardous Substances in electronic equipment (RoHS)” set mandatory on July 1 2006 The following products have been assembled with devices, components and parts manufactured using Lead (Pb) free solder. • IT-600M30 • IT-600M30C • IT-600M30R • IT-600M30CR...
1.2. Available Models Table 1.1 Model Memory Color touch panel Digital camera Bluetooth WLAN display module module FROM IT-600M30 64 MB 128 MB IT-600M30C 64 MB 128 MB IT-600M30R 64 MB 128 MB ETSI IT-600M30CR 64 MB 128 MB ETSI 1.3.
1.5. External Views 1.5.1. IT-600 Fig 1.1 See Table 1.4 for the descriptions for each referenced part on the Handheld Terminal.
Page 9
Table 1.4 Names of parts Name Description Buzzer Sounds a buzzer. Indicator 1 Orange : Charging the battery pack. Green : Charging the battery pack complete. : Battery pack is abnormal or the surrounding temperature is out of the range. Indicator 2 Flashes in blue when operating via Bluetooth or in orange when operating via WLAN.
1.5.2. HA-D60IO The following external views show the HA-D60IO (USB Cradle). Refer to Table 1.5 for each referenced part on the HA-D60IO. Views Front Front Rear Rear Fig 1.2...
Page 11
Table 1.5 Names of parts Name Description USB Client Port Used to transfer system data and file data (download, upload) by connecting the Cradle to a PC using a USB cable (DT-380USB). A dedicated driver must be installed in the PC before connecting the Cradle to the PC.
1.5.3. HA-D32DCHG (Dual Battery Charger) The following external views show the HA-D32DCHG (Dual Battery Charger). Refer to Table 1.6 for each referenced part on the HA-D32DCHG. Views Right Right Left Left Bottom Bottom Fig 1.3 Table 1.6 Names of parts Name Description Charge indicator lamps...
1.5.4. HA-D30CHG (Cradle-type Charger) The following external views show the HA-D30CHG (Cradle-type Charger). Refer to Table 1.7 for each referenced part on the HA-D30CHG. Views Front Front Rear Rear Fig 1.4 Table 1.7 Names of parts Name Description AC Adaptor Connect the AC adaptor here.
Page 17
Input Keyboard Numeric (Alphabet) keys, CLR key, Execute key, Fn key, Text key, Cursor key Control keys Power ON/OFF key, Reset switch Trigger keys Trigger R key, Trigger L key, Center trigger key Touch panel Infrared communication interface Standard IrDA ver.1.3 compatible Communication process Half duplex Synchronization...
Page 18
SD card slot miniSD memory card In the battery compartment. Terminals Layout for USB cradle Description See Table 2.2 Headset jack 4 poles in rounded shape Speaker Monaural Microphone Monaural Digital camera Number of pixels Approximately 1,000,000 pixels Device 1/4.5-type CCD color Aperture F3.5/F7.0 (2 steps switchover) Focal distance...
Page 19
Operating period IT-600M30/M30C IT-600M30R/M30CR Approx. 11 hours (with Approx. 10 hours (with *1 based on the ratio of HA-D20BAT)*1 HA-D20BAT)*2 “standby:calculation:scan” at Approx. 22 hours (with Approx. 20 hours (with 20:1:1 when the CPU speed HA-D21LBAT)*1 HA-D21LBAT)*2 is set to auto power save mode and the backlight is turned off.
Page 20
• Terminal layout and the description Table 2.2 Terminal no. Signal Description Direction V BUS Power from USB cradle OUT/IN (see note) V CRADLE Power supply/Charge to terminal USB D + IN/OUT USB_ID Switch-over between USB host and USB client USB D - IN/OUT Note:...
• Terminal layout Fig 2.1 • Terminal layout and the description Table 2.4 Terminal no. Signal Description Direction V BUS Power from USB cradle OUT/IN (see note) V CRADLE Power supply/Charge to IT-600 USB D + IN/OUT USB_ID Switch-over between USB host and USB client USB D - IN/OUT Note:...
2.4. HA-D30CHG Table 2.6 Item Specification Remark Input from AC adaptor Input voltage DC 5V±5% Consumption DC5V approx. 2.5 A current Plug EIAJ RC-5320A type 3 Center pin; + AC adaptor AD-S15050A Dedicated AC adaptor Terminal layout Power supply Power supply/Charge Output voltage DC5V±10% Output current...
(reserved by the manufacturer) Check digit Production month of the year (1 to 9, A,B,C) Production year (last digit only. Ex. 1 represents the year 2001.) Model number (two digits in alphanumeric) A8: IT-600M30 A9: IT-600M30C AA: IT-600M30R AB: IT-600M30CR AD: HA-D30CHG AC: HA-D60IO Fig 3.1...
Quality References This chapter will describe about references of the IT-600 and its dedicated options concerned with environmental performance, compliance, mechanical and electric durability, etc. 4.1. Environmental Performances 4.1.1. IT-600 Table 4.1 Item Specification Condition Temperature Operation -10 ºC to 50 ºC 0 to 40 ºC for charging battery pack Non-operation...
4.1.5. HA-D50BN Table 4.5 Item Specification Condition Temperature Operation -10 ºC to 50 ºC Non-operation -20 ºC to 60 ºC Humidity Operation 10 % to 80 %RH No condensation Non-operation 5 % to 90 %RH Storage in carton box Temperature -20 ºC to 60 ºC Humidity 90 %RH or less...
4.2.3. HA-D32DCHG Table 4.8 Item Specification Remark Consumption current Approx. 0.03 A While the battery pack is not being installed. Approx. 0.8 A While the battery pack is installed and it is being charged. Input voltage DC12V±5% Anti-static strength ±6 KV In contact 150 pF, 330 ohm ±8 KV...
4.3. Mechanical Performances 4.3.1. IT-600 Table 4.10 Item Specification Condition Resistance to drop impact 120 cm Onto concrete floor. (height) One time on each of the 6 sides and 4 corners. Resistance to impact Height of drop 70 cm (in individual carton box) 1 cycle on each of the 6 sides and 1 corner.
4.3.3. HA-D32DCHG Table 4.12 Item Specification Condition Resistance to vibration 1.5 G or less 10 to 55 Hz In X,Y, and Z directions Reciprocally for 15 minutes While the power is being turned off. Resistance to vibration 1.5 G or less 10 to 55 Hz (in carton box) In X,Y, and Z directions...
4.3.5. HA-D50BN Table 4.14 Item Specification Condition Resistance to vibration 1.5 G or less 10 to 55 Hz In X,Y, and Z directions Reciprocally for 15 minutes With HA-D50BN being attached on IT-600. Resistance to impact In bare condition 120 cm 1 cycle on each of the 6 sides 6 faces, 1 corner and 3 edges On to concrete floor.
4.4. Reliability 4.4.1. IT-600 Table 4.15 Item Specification Condition Service life Backlight 15,000 hours 50,000 hours Touch panel key input 800,000 times With 8.60º rubber with load of 250 g applied Writing on touch panel 100,000 Katakana With 0.8R polyacetar stylus with load of 250 g characters applied Discharge/charge cycle longevity...
4.4.2. HA-D60IO Table 4.16 Item Specification Condition MTBF for electronic parts 20,000 hours Installing and removing USB client port’s connector 500 times USB host port’s connector 500 times Mounting IT-600 and 45,000 times removing Switching Selector switch (USB Host or 500 times One reciprocal switching as USB Client)
Type EN60825-1:1996 1998 1998 EN 300.328-2 Approval (IEC60825-1:1997 EN 301.489-17 Class 2) EN50371 IT-600M30 IT-600M30C IT-600M30R See note See note IT-600M30CR See note See note Note: IT-600M30R and IT-600M30CR are compliant with the respective criteria set on the EN55022 and EN55024 standards.