Samsung DIGIMAX 220 SE User Manual page 44

SETTING UP SHOOTING FUNCTION
Continuous shooting
You can take a sequence of pictures of moving objects.
When the continuous shooting is completed, it automatically returns to single shooting mode.
If the ENTER button is pressed after selecting continuous shooting mode,
the LCD monitor will display the BURST SET menu, where the amount of
shots required can be selected, by using the direction buttons.
1 The maximum number of continuous shooting pictures possible, is determined by the selected image
quality and image resolution.
2 By pressing the ENTER button in the BURST SET menu, you will be able to return to the CAPTURE menu
screen. The number of shots chosen will then be displayed underneath the continuous shooting icon.
3
If you press the MENU button, the setup MENU screen is canceled and the camera is ready for the
continuous shooting.
Reference
The flash will not work when continuous shooting is selected.
When *.tif mode has been selected, the continuous shooting mode does not work and you will
only be able to use only the single shot mode.
If you wish to cancel the continuous shooting while you are using it, press the POWER button.
44
LARGE
The number of continuous shots are marked
SMALL