Powersaver - Samsung SyncMaster 900IFT Owner's Instructions Manual

SE-900IFT-E 4/29/92 5:23 PM

PowerSaver

State
Horizontal Sync Active
Vertical Sync
Video
Power
Indicator
Power
Consumption
Page 15
This monitor has a built-in power management system
called PowerSaver. This system saves energy by switching
your monitor into a low-power mode when it has not been
used for a certain amount of time. The available modes are
"On," "Standby," "Suspend," and "Off".
This system operates with a VESA DPMS compliant video
card installed in your computer. You use a software utility
installed on your computer to set up this feature. See the
table below for details.
Power Saving function mode EPA/NUTEK
Normal
Standby mode
Operation
Inactive
Active Active
Active Blanked
Green Amber
130 W (Max.)
65 W (Nominal)
110 W (Nominal)
NOTE: This monitor automatically returns to normal
operation when horizontal and vertical sync return.
This occurs when you move the computer's mouse
or press a key on the keyboard.
This monitor is EPA
compliant when used with a computer equipped with VESA
DPMS functionality.
For energy conservation, turn your monitor OFF when it is
not needed, or when leaving it unattended for long periods.
Chapter Three: Adjusting Your Monitor
Suspend mode / Power-off Mode /
Position A1 Position A2
Active Inactive
Inactive Inactive
Blanked Blanked
Amber/Green Amber
Blinking Blinking
Less than 15 W Less than 5 W
E S
® compliant and NUTEK
NERGY TAR
15