Display Timing; Video Input Level - Samsung SyncMaster 900IFT Owner's Instructions Manual

SE-900IFT-E 4/29/92 5:23 PM
Hz
Factory Timing
31k/ 70 720x 400
31k/ 60 640x 480
43k/ 85 640x 480
54k/ 85 800x 600
68k/ 85 1024x 768
Previous Menu
Hz

Video Input Level

0.7V 1.0V
Previous Menu
Page 13

Display Timing

This screen displays the settings that are available to your
G
monitor. This screen only displays this information;
you cannot select a new setting.
1 With the menu off, push the MENU button. Push the
%
button or
is displayed.
2 Push the
3 Use the button or
factory timings.
Video Input Level
This feature will select the video signal level.
G
1 With the menu off, push the MENU button.
$
Push the
Level" screen is displayed.
2 Push the
selection screen.
$
3 Use the or
NOTE: Some video cards use video signals higher than 1.0 V
which causes the display to be very bright.
For those video cards, select 1.0 V.
.
Chapter Three: Adjusting Your Monitor
button until the "Display Timing" screen
button to display the factory timing screen.
button to display the user and
%
button or button until the "Video Input
button to open the video input level
%
buttons to select 0.7 V or 1.0 V.
$
13