Preset Timing Modes - Samsung SyncMaster 720XT User Manual

State
Power Indicator
Power Consumption
PowerSaver (When used as a Network monitor)
This monitor has a built-in power management system called PowerSaver. This system saves energy
by switching your monitor into a low-power mode when it has not been used for a certain amount of
time. The monitor automatically returns to normal operation when you press a key on the keyboard.
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended
for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed
in your computer. Use a software utility installed on your computer to set up this feature.
State
Power Indicator
Power Consumption

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes, the
screen will be adjusted automatically. However, if the signal differs, the screen may go blank while
the power LED is on. Refer to the video card manual and adjust the screen as follows.
Preset Timing Modes
Display Mode
IBM, 640 x 350
IBM, 640 x 480
IBM, 720 x 400
MAC, 640 x 480
MAC, 832 x 624
VESA, 640 x 480
VESA, 640 x 480
VESA, 800 x 600
VESA, 800 x 600
VESA, 800 x 600
VESA, 800 x 600
VESA, 1024 x 768
Normal Operation
Green
Less than 70 W
Normal Operation
Green
Less than 70 W
Horizontal Vertical
Frequency Frequency
(kHz) (Hz)
31.469 70.086
31.469 59.940
31.469 70.087
35.000 66.667
49.726 74.551
37.861 72.809
37.500 75.000
35.156 56.250
37.879 60.317
48.077 72.188
46.875 75.000
48.363 60.004
Power saving mode
Green, Blinking
Less than 4 W
Power saving mode
Black
Less than 40 W
Pixel Clock
(MHz)
25.175
25.175
28.322
30.240
57.284
31.500
31.500
36.000
40.000
50.000
49.500
65.000
Power off
(Power button)
Black
Less than 4 W
Power off
(Power button)
Black
Less than 4 W
Sync Polarity
(H/V)
+/-
-/-
-/+
-/-
-/-
-/-
-/-
-/-
+/+
+/+
+/+
-/-