Page 2
If using screen saver, set it to active screen mode. The images here are for reference only, and are not applicable in all cases (or countries). Model SyncMaster 723N Important to read and understand at all times Disconnect the plug from the outlet...
Page 3
Do not use a damaged power cord or plug or a damaged or loose power outlet. Otherwise, this may result in electric shock or fire. Do not touch the power plug with wet hands when removing or plugging the plug into the outlet. Otherwise, this may result in electric shock.
Installation Be sure to contact an authorized location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc. Failure to do so may cause serious damage to your monitor. Do not drop the monitor when moving it.
Page 5
Ensure that an authorized installation company installs the wall mount. Otherwise, it may fall and cause personal injury. Make sure to install the specified wall mount. Install your product in a well ventilated location. Ensure that there is a clearance of more than 10 cm from the wall. Otherwise, it may result in fire due to an increase in the internal temperature.
Page 6
Otherwise, it may result in fire. When cleaning the product, make sure to disconnect the power cord. Otherwise, it may result in electric shock or fire. When cleaning the product, disconnect the power cord and clean it softly with a dry cloth. (Do not use chemicals such as wax, benzene, alcohol, thinner, mosquito repellant, lubricant, or cleaner.) These may change the appearance of the product surface and peel off the indication labels on...
Page 7
When you drop the product or the case is broken, turn the power off and disconnect the power cord. Contact a Otherwise, this may result in electric shock or fire. If thunder or lightening is occurring, do not touch the power cord or antenna cable.
Page 8
a resolution and frequency appropriate to the product. Otherwise, your eyesight may be damaged. If you continually move closer to the product screen, your eyesight may be failing. To ease eye strain, take at least a five-minute break after every hour of using the monitor.
Page 9
Otherwise, it may fall and result in personal injury and/or damage to the product. Do not place the product in a location exposed to direct sunlight or near any heat such as a fire or heater. This may reduce the lifetime of the product, and may result in fire. Do not drop any objects onto the product or cause any impact to the product.
Page 10
Good Postures When Using the Monitor When using the product, use it in the correct position. Keep your back straight while looking at the product. The distance between your eyes and the screen should be between 45 to 50 cm. Look at the screen from a slightly higher location than the height of the screen.
Page 11
Monitor & Simple stand MagicRotation program can not be provided as Simple Stand does not support Pivot function. Manual Quick Setup Guide Cable Model SyncMaster 723N contact your dealer. to buy optional items. Bottom Warranty Card User's Guide, (Not available in all...
D-sub Cable Front MENU button [ ] Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu. Customized Key[ You can customize key assignment for the Custom button according to your preferences. When OSD is not on the screen, push the button to adjust Brightness button brightness.
Page 13
Rear (The configuration at the back of the monitor may vary from product to product.) POWER port Connect the power cord for your monitor to the power port on the back of the monitor. RGB IN port Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.
[ RGB IN ] Connected to a Macintosh. Connect the monitor to the Macintosh computer using the D-sub connection cable. If the monitor and the computer are connected, you can turn them on and use them. Using the Stand SyncMaster 723N Model...
Monitor Assembly Monitor and Bottom Attaching a Base This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad. A. Monitor B. Mounting interface pad (Sold separately) 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen.
4. If you can see following message window, then click the "Continue Anyway" button. Then click "OK" button. (Microsoft This monitor driver is under certifying MS logo,and this installation don't damage your system.The certified driver will be posted on Samsung Monitor homepage http://www.samsung.com/.
Page 17
Internet web site : http://www.samsung.com/ http://www.samsung.com/monitor http://www.sec.co.kr/monitor http://www.samsungmonitor.com.cn/ ® Microsoft Windows Vista™ Operating System 1. Insert your Manual CD into your CD-ROM drive. 2. Click (Start) and "Control Panel". Then, double-click on "Appearance and Personalization". 3. Click "Personalization" and then "Display Settings".
Page 18
This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage http://www.samsung.com/ 6. Click "Update Driver…" in the "Driver" tab. 7. Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device drivers on my computer".
10. Click "Close"→ "Close" → "OK" → "OK" on the following screens displayed in sequence. ® ® Microsoft Windows XP Operating System 1. Insert CD into the CD-ROM driver. 2. Click "Start" —> "Control Panel" then click the "Appearance and Themes" Icon. 3.
Page 20
4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab. 5. Click "Update Driver.." and select "Install from a list or.." then click "Next" button. 6. Select "Don't search ,I will.." then click "Next" and then click "Have disk". 7.
8. If you can see following "Message" window, then click the "Continue Anyway" button. Then click "OK" button. This monitor driver is under certified MS logo,and this installation doesn't damage your system.The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ 9. Click the "Close" button then click "OK" button continually.
Page 22
1. Click "Start" , "Setting" , "Control Panel". 2. Double click the "Display" Icon. 3. Choose the "Settings" tab and then click "Advanced..". 4. Choose "Monitor". Case1: If the "Properties" button is inactive, it means your monitor is properly configured. Please stop installation Case2: If the "Properties"...
Page 23
]This button allows you to adjust items in the menu. 3. [ ]Press this button to activate a highlighted menu item. 4. [AUTO]Press to self-adjust to the incoming PC signal. The values of fine,coarse and position are adjusted automatically. AUTO SyncMaster 723N Model...
Page 24
Menu When the 'AUTO' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically. (Available in analog mode only) AUTO - If auto adjustment does not work properly, press AUTO button again to...
After pushing the "MENU" button more than 5 seconds, OSD function is locked (unlocked). Locked Customized key Menu You can customize key assignment for the Custom button according to your preferences. To view the operating screen displayed when pressing the [ after configuring the customized key for a function, click the name of each function.
Page 26
Menu Brightness When OSD is not on the screen, push the button to adjust brightness. Brightness Picture MagicColor Color Coarse Image Language Setup Reset Information Picture Description Contrast MagicBright Color Tone Color Control Color Effect Fine Sharpness H-Position H-Position V-Position Transparency Customized Off Timer...
Page 27
Menu You can use the on-screen menus to change the brightness according to personal preference. Direct Access Feature : When OSD is not on the screen, Brightness push the [ [MENU → → You can use the on-screen menus to change the contrast according to personal preference.
Page 28
Color Menu MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality. 1) Off - Returns to the original mode. 2) Demo - The screen before applying MagicColor...
Page 29
Grayscale - displayed. Green - Select this mode when you want to adjust Aqua Color Effect Sepia - This applies the Sepia color effect to a [MENU → , → Gamma correction changes the luminance of the colors with intermediate luminance. Mode 1 Gamma Mode 2...
Page 30
Changes the horizontal position of the monitor's entire display. H-Position (Available in analog mode only) [MENU → , → Changes the vertical position of the monitor's entire display. V-Position (Available in analog mode only) [MENU → , → Menu You can choose one of 9 languages. Language Note:The language chosen affects only the language of the OSD.
Page 31
are made for a certain time period. You can set the amount of time the menu will wait before it Display Time is turned off. [MENU → , Setup Menu Reverts the product settings to factory defaults. Reset [MENU → , You can specify a function which will be activated when the Customized Key( Customized Key...
Page 32
Menu Description Shows a video source, display mode on the OSD screen. Information [MENU → , → MENU]...
Adjust the maximum resolution and frequency that the monitor can handle properly. If the display exceeds SXGA or 75 Hz, a "Not Optimum Model SyncMaster 723N Solutions button to have the monitor Preset Timing Modes) contact dealer.
Page 34
There is no image on the screen. Is the power indicator on the monitor blinking at 1 second intervals? Connected using the DVI cable? I cannot see the On Have you locked the On Screen Screen Display. Display (OSD) Menu to prevent changes? The screen shows Is the screen displaying only one...
There are only 16 Have the Windows colors been set colors shown on the properly? screen. The screen colors have changed after Has the video card been set changing the video properly? card. There is a message Have you installed the monitor that reads driver? "Unrecognized...
Page 36
Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly. Self-Test Feature Check 1. Turn off both your computer and the monitor. 2. Unplug the video cable from the back of the computer. 3.
Page 37
General General Model Name SyncMaster 723N LCD Panel Size 17 inch (43 cm) Display area 337.920 mm (H) x 270.336 mm (V) Pixel Pitch 0.264 mm (H) x 0.264 mm (V) Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.7M...
Page 38
Temperature: -4 °F ~113 °F (-20 °C ~ 45 °C) Humidity: 5% ~ 95%, non-condensing Power saving mode Blue Blue, Blinking 31 W Less than 1 W ® Partner, SAMSUNG has determined that this ® Power off EPA/ENERGY 2000 (Power button) Black Less than 1 W ®...
Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Table 1.
Page 40
Like a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user. The frequency of this repetition is called the Vertical Frequency or Refresh Rate. Unit: Hz...
Page 41
Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. U.S.A 1-800-SAMSUNG (726-7864) CANADA 1-800-SAMSUNG (726-7864) MEXICO 01-800-SAMSUNG (726-7864) ARGENTINE 0800-333-3733 0800-124-421 BRAZIL 4004-0000 CHILE 800-SAMSUNG(726-7864) COLOMBIA 01-8000112112 COSTA RICA...
Page 43
010- 6475 1880 HONG KONG 3698-4698 3030 8282 INDIA 1800 110011 INDONESIA 0800-112-8888 JAPAN 0120-327-527 MALAYSIA 1800-88-9999 NEW ZEALAND 0800 SAMSUNG(726-7864) PHILIPPINES 1800-10-SAMSUNG (726-7864) SINGAPORE 1800-SAMSUNG (726-7864) THAILAND 1800-29-3232, 02-689-3232 TAIWAN 0800-329-999 VIETNAM 1 800 588 889 SOUTH AFRICA 0860-SAMSUNG(726-7864)
Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Page 45
the ENERGY STAR® guidelines for energy efficiency. All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners. RoHS Verified: The RoHS directive 2002/95/EC bans using the 6 substances listed below with electric and electronic equipment.
PRODUCT INFORMATION (Image Retention Free) LCD Monitors and TVs may have image retention when switching from one image to another especially after displaying a stationary image for a long time. This guide is to demonstrate correct usage of LCD products in order to protect them from Image retention.
Page 47
The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it. Image retention may not occur when a LCD panel is operated under normal conditions. Normal conditions are defined as continuously changing video patterns.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.