Samsung SyncMaster 240MP Owner's Instructions Manual page 30

5_E240MP22p.fm Page 28
Table 2. Troubleshooting – Image ( Continued )
What you see...
Screen is blank and
power indicator light
is steady amber or
blinks every 0.5 or 1
seconds
Image is not stable
and may appear to
vibrate
Image is not centered
on the screen.
You need the monitor
driver software
Thursday, July 12, 2001
Appendix
Suggested Actions
The monitor is using its power
I
management system.
Move the computer's mouse or
I
press a key on the keyboard
Check that the display resolution
I
and frequency from your PC or video
board is an available mode for your
monitor. On your computer check:
Control Panel, Display, Settings
If the setting is not correct, use your
I
computer utility program to change
the display settings.
NOTE: Your monitor supports multiscan display functions within
the following frequency domain:
Horizontal frequency:
I
Vertical frequency:
Maximum refresh rate:
Adjust the horizontal and vertical
I
position.
Download the driver from WWW pages:
I
http://www.samsung-monitor.com
http://www.samsungmonitor.com (USA only)
English 28
10:26 AM
Reference
Power Saver, page 26.
Display Modes, page 31.
Installing the Video
Driver, page 6.
Analog: 30 kHz ~ 90 kHz
50 ~ 85 Hz
1920 x 1200
H-Position, page 13.
V-Position, page 13.