And Features - Kenmore 23102 Use & Care Manual

CONTROL PANEL AND FEATURES
Two One Rinse
Medium Cool Warm Rinses w/SOFTENER
• g g g
Small o ®Large One e ® Two Rinses
E_"o . _
1 o D°°p _f II II ! R .... { II I1_ i ........
7
Small _, Fill
Lead Size Wash Temp Rinse
Normal
Regular
ii iii _flExp . ...
;_i:Casual
II) J °°"°°'°'
Rinse I
Spin
D,oin ISp_°
Clean Washer _ START
SENSlSG W,,S_ RINSE S_INCOMPLETE _ID LOCKED CANCEL
CD CD CD CD CD CD .........
[ __ 1
O
O
Not allfeatures and options are available
on allmodels.
Appearance may vary.
LOAD SIZE
Select the setting most suitable for your load. Extra Small win
add a low amount of water for smaller loads and Large or
Deep FiN win add the most amount of water for large or bulky
loads. Items need to move freely. Tightly packing the load
can lead to poor cleaning performance, and may increase
wrinkling and tangling.
WASH TEMP
Wash Temp senses and maintains uniform water temperatures
by regulating incoming hot and cold water.
Select a wash temperature based on the type of fabric and
soils being washed. For best results and foNowing the garment
label instructions, use the warmest wash water safe for your
fabric.
" On some models and cycles, warm and hot water may be
cooler than your previous washer.
• Even in a cold and cool water wash, some warm
water may be added to the washer to maintain
a minimum temperature. All rinses are cold.
O
@
RINSE OPTIONS (on some models)
The following options may be added to most cycles.
ONE RINSE
Provides basic rinsing for any cycle.
TWO RINSES
This option can be used to automatJcaNy add a second
rinse to most cycles.
ONE RINSE with Softener
This option must be selected Jf using fabric softener
during a cycle. It ensures that fabric softener is added
at the correct time Jn the rinse for even distribution.
TWO RINSES with Softener
This option turns on both the fabric softener and the
Two Rinses options,
WASH CYCLE KNOB
Use the Wash Cycle knob to select cycles on your washer.
See "Cycle Guide" for detailed descriptions of cycles.
O START/PAUSE/Unlock Lid button
Press to start the selected cycle; press again to pause the
cycle and unlock the lid.
NOTE: If the washer is spinning, Jt may take several minutes to
unlock the lid. Press and hold for 3 seconds to cancel a cycle.