Appendix; Powersaver - Samsung SyncMaster 210T Owner's Instructions Manual

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves
energy by switching your monitor into a low-power mode when it has not been used for a
certain period of time. The available modes are "On", "Standby", "Sleep", and "Deep Sleep".
Power Saver operates with a VESA DPMS compliant video card installed in your computer.
You use a software utility installed on your computer to set up this feature. See Table 2 below
for details.
Table 2. Power-saving modes
State
Horizontal Sync Active
Vertical Sync Active
Video Active
Power
Green
Indicator
Power 210T: 90W (Max.)
Consumption 240T: 95W (Max.)
NOTE: This monitor automatically returns to normal operation when horizontal and vertical
sync return. This occurs when you move the computer's mouse or press a key on the
keyboard.
*This monitor is EPA E
computer equipped with VESA DPMS functionality.
For energy conservation, turn your monitor OFF when you are not using it or when leaving it
unattended for long periods.
NOTE: Maximum power consumption is measured after letting the monitor turned on for 30
minuites that is the time required for the unit to be thermally stable.

Appendix

Normal
Operation
Standby Mode
Inactive
Active
Blanked
Amber
Less than 5W
®
S compliant and NUTEK compliant when used with a
NERGY TAR
English
Power-Saving Function mode (EPA/NUTEK)
Sleep Mode
Position A1
Active
Inactive
Blanked
Amber Blinking
(0.5 sec interval)
Less than 5W
20
Deep Sleep Mode
Position A2
Inactive
Inactive
Blanked
Amber Blinking
(1 sec. interval)
Less than 5W