Maintenance And Service - Empire Comfort Systems DVCT30CBN95N-1 Homeowner's Manual

Barrier & Glass Removal
1. Lift barrier screen and pull towards you.
2. Use the Glass Latch Tool to grip the latch bar and pry it over
the Glass Frame hook flanges. Tilt the Glass Frame towards
you and pull upwards to remove it from the unit. See Figures
32 and 33.
Ensure that the latch tool is completely hooked around the
latch before trying to disengage the clips. Glass clips are
tightly sprung. If the latch tool slips off of the latch while
pulling, injury may occur.
Page 12

MAINTENANCE AND SERVICE

CAUTION
Figure 32
Figure 33
Light Bulb(s) Replacement
1. Remove the following items:
• barrier screen
• glass frame assembly
This unit comes standard with a light that is attached to the roof of
the fireplace. To access the light bulb you will remove the following
items by removing four screws. See Figure 34.
• metal bezel
• glass
• gasket
NOTICE: Use gloves when handling light bulb, oils on your hand
will diminish the lifespan of the light bulb.
2. Remove old light bulb and replace with new one.
See Figure 35.
NOTICE: You may order light bulbs from your local Empire dealer
or purchase them from your local hardware store.
LIGHT BULB SPECIFICATIONS
35w Clear Halogen, Bi-Pin 6.35mm base,120vac, UL
Figure 34
Figure 35
38101-1-0318