Table of Contents
Advertisement
Adjusting Your Monitor
Automatic Save
Whenever you open the on screen display and allow an adjustment window to remain active
for about 3 seconds without pressing another button, the monitor automatically saves any
adjustments you have made. These changes are saved into a user area in the monitor. User
areas are reserved according to the signal frequency from your computer. The monitor can
save adjustments for up to 10 user modes. It has 8 factory preset or preload modes, one for
each signal frequency as listed in Display Modes on page 28.
If you have made no adjustments, the on-screen menu disappears and the monitor does not
save anything. To exit without saving the changes you have made, press the EXIT (
button before the 3 seconds elapse.
Direct-Access Feature
The feature described on this page and the next page can be accessed quickly, at the touch
of one button. When you finish making adjustments to a feature, push the EXIT (
to turn off the menu or allow the OSD to time out and disappear automatically
Information
Information
Frequency Range:
H: 30 - 121kHz
V: 50 - 185Hz
Recommended Timing:
1600x1200 / 85Hz
Serial Number:
37k/70
640x350
The Information on this screen shows available
horizontal and vertical frequencies and display
resolution.
1
With the menu off, push the
once to see information about your monitor.
The current Horizontal/Vertical frequencies
received from the computer or video board is
displayed along the bottom.
2
Push the
button once more to see the
i
user defined timing mode.
3
Scroll down with the button to display the
factory preset timings.
Note: These screens do not allow any changes to
the settings; they are for information only.
English
9
)
) button
button
i
Hide quick links:
Advertisement
Table of Contents
