Air Supply - Siemens SINUMERIK 840D Maintenance Manual

3.1.3 AIR SUPPLY

OCTOBER 2005
3. At this point the VMC is ready for power and air connections.
Hole provided for 1-1/4" bar
minimum bar length 36"
Figure 3-1: Placing the VMC
WARNING!
AIR PRESSURE REQUIRED: 120 psi before regulator, 80 psi after regulator, 15
scfm (standard cubic feet per minute) momentary.
1. Connect the 3/8" air hose to the VMC.
INSTALLATION PROCEDURE
SIEMENS MAINTENANCE MANUAL
1-8"eye bolt 2 places
1.5" eye bolt 2 places for 6535
Maximum fork width is 6.00"
43