Samsung Tint SCH-R420 Series User Manual page 93

Select the desired option. A pop-up message appears to
8.
inform you that your phone is connected with the selected
device.
Connecting to a Bluetooth Device
From the Registered List,
Highlight the device and press
1.
Connected icon (
If you are unable to connect with the device a pop-up
2.
appears in the display. Press the Yes soft key to retry.
Disconnecting from a Bluetooth Device
From the Registered List,
Highlight the device and press the Off soft key.
Tip: You can also disconnect from another Bluetooth device by turning the
device off.
Managing Your Registered List
From the Registered List,
Highlight a device and press the Options soft key. The
1.
following options appear in the display:
• Remove Device — Deletes the device from the Registered List.
. The blue Bluetooth
) appears in the display.
• Rename Device — Lets you change or replace the device name,
as needed.
• Incoming Security — Lets you select whether to Always Ask for
verification of a connection with the selected device or to Always
Connect to the selected device without verification prompting.
• Device Info — Shows the type of device, status, address, the date
when it was paired with your phone, and the date the device was
last connected with your phone.
• Send Name Card — Lets you send Contacts entry information to
another Bluetooth device.
Highlight the desired option and press the
2.
access that option.
Bluetooth Settings
Enable/Disable
Selecting this option turns Bluetooth on or off. (For more
information, see "Turn Bluetooth On/Off" on page 88.)
Discovery Mode
Allows other users to see your accessibility. Select On for other
devices to see your device, or Off for no visibility.
Device Name
Shows the handset name. You may change this name. Enter the
text and press the key.
key to
Tools 90