Samsung Tint SCH-R420 Series User Manual page 48

Portable tri-band mobile phone
Hide thumbs Also See for Tint SCH-R420 Series:
Table of Contents

Advertisement

Example: To speed dial the Contacts entry assigned to Speed Dial 5, press
and hold
, (1-touch dialing).
To speed dial the Contacts entry assigned to Speed Dial 35, press
then press and hold
To speed dial the Contacts entry assigned to Speed Dial 235, press
, press
, then press and hold
You can assign one or more Speed Dial numbers to a Contacts
entry during new entry creation or by editing an existing entry.
Assignment During Entry Creation
To assign a Speed Call number to a new Contacts entry number,
do the following:
Follow either of the New Contacts entry procedures (see
1.
"Adding a New Contacts Entry" on page 39) until you enter
a name for the entry.
After entering the Contacts entry name, do not press
2.
Instead, use the Up/Down navigation keys to highlight the
number field.
Press Options. The following options appear in the display:
3.
• Set Speed Dial — Assign a speed dial number.
• Set as default — Set the number the phone will dial when
Contacts dialing, speed dialing, or voice dialing.
45
, (2-touch dialing).
, (3-touch dialing).
• Wait — A hard pause (waits for input from you).
• 2-Sec Pause — A 2-second pause after which dialing resumes
(see "Add Pauses to Contacts Numbers" on page 41 for more
information).
Use the Up/Down navigation keys to highlight Set Speed
Dial, then press
display.
Use the Up/Down navigation keys to highlight an
4.
Unassigned Speed Dial number or enter an Unassigned
Speed Dial number in the Go To field using the keypad.
Important!: Do not enter Speed Call numbers 1, 211, 311, 411, 611, or 911.
These numbers are already assigned to such services as
Voicemail (001), Information (411), Customer Care (611), and
emergency use (911).
Press SET. You are prompted to confirm your Speed Dial
5.
.
number assignment.
Press the Yes to save your Speed Dial assignment and
6.
return to the Add New Entry screen.
Note: Press No to discard the assignment and return to the Speed Dial
screen.
Press
to save your changes.
7.
. The Speed Dial screen appears in the

Advertisement

Table of Contents
loading

Table of Contents