Network Profile Configuration - Samsung SUNBURST SGH-A697 Series User Manual

• Mass Storage: allows you to utilize the onboard storage capacity of
the phone's microSD card to store and upload files. This option
allows your computer to detect the phone's microSD card as a
removable storage drive.
Touch .
3. Save

Network Profile Configuration

Your phone is wirelessly connecting to the Internet via a built in
WAP browser. Connection can be made via either MEdia Net or
AT&T MMS (MultiMedia Server).
Use this menu to create and customize the profiles containing the
settings for connecting your phone to the network. Although the
active connection can be changed by the user, it is recommended
that this choice be made with the assistance of either the retailer
or customer service representative.
From Idle mode, touch
1.
Network Profiles.
Touch one of these options:
2.
• MEdia Net
• AT&T MMS
Note: The MEdia Net WAP and AT&T MMS are pre-configured and cannot be
altered on this screen. Your phone is set up by default for connecting to
the network.
➔ ➔ ➔
Settings Connectivity
To create a new connection, touch
3.
Select the parameter you want to edit:
4.
• Set Name: enter a profile name.
• Access Name: edit the access point name.
• Auth Type: select the type of authentication used for this WAP
connection: None, Normal, or Secure.
• User ID: enter the User ID required to connect to the network.
• Password: enter the user password required to connect to the
network.
• Protocol: set the connection protocol used by the WAP browser:
WAP, HTTP, or Other.
• Home URL: enter the URL address of the page to be used as your
homepage.
• Gateway Address: (WAP only) enter the gateway address of the
proxy server.
• Proxy Address: (HTTP only) set the proxy server address and port.
• Secure Connection: (WAP only) set to On or Off.
• Linger Time (sec.): set a time period (in seconds) after which the
network is disconnected if there has been no new data traffic in that
time.
• Advanced Settings: allows you to configure some of the IP-specific
information: Static IP, Static DNS, Server information, and Traffic
Class.
Create .
Changing Your Settings 61