Switching The Phone On Or Off - Samsung Strive SGH-A687 Series User Manual

Correct
Plug the flat end of the Travel Adapter into the Power/
2.
Accessory Interface connector and the other end into a
standard AC wall outlet.
When charging is finished, remove the flat end from the
3.
interface connector jack on the phone.
Warning!: If your device has a touch screen display, please note that a touch-
screen responds best to a light touch from the pad of your finger
or a non-metallic stylus. Using excessive force or a metallic object
when pressing on the touch screen may damage the tempered
glass surface and void the warranty. For more information, refer to
"Standard Limited Warranty" on page 139.
8
Incorrect
Note: Failure to unplug the wall charger before you remove the battery, can
cause damage to the phone.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time
remain, the battery icon (
warning tone at regular intervals. In this condition, your phone
conserves its remaining battery power by reducing the
backlight's brightness and entering a dimming mode. For a quick
check of your battery level, glance at the battery charge indicator
located in the upper-right corner of your device's display. Five
bars ( ) indicate a full charge.
When the battery level becomes too low, the phone automatically
turns off.

Switching the Phone On or Off

Press and hold
1.
The phone launches the activation splash screen and then
proceeds to search for the network. Once the network has
been found, you can make or receive calls.
Note: The display language is preset to English at the factory. To change the
language, use the Language menu. For more information, refer to
"Changing Your Settings" on page 29.
) blinks and the device sounds a
or until the phone switches on.