To set the timer start time
●
●
1
. I n.the.Timer.Mode,.hold.down.A.for.about.two.seconds.
●
●
2
. E ach.press.of.C.causes.the.flashing.to.move.between.the.hours.and.the.
minutes.digits.
The flashing digits are the ones that are selected.
[SET Hold] will appear on the display. After that, [SET
Hold] will disappear and the hours digits will flash.
Note
•
If a timer countdown operation is in progress, press
D to stop it and then press B to reset the timer to
its start time before performing the above step.
•
If a timer countdown operation is paused, press B
to reset the timer to its start time before performing
the above step.
E-41