Table of Contents
Advertisement
2-Sec Pause — Stops the calling sequence for two seconds, then sends the
•
remaining digits.
Note: You can enter multiple Waits to extend the length of a pause. For example, two consecutive Waits
cause a total pause time of four seconds. Keep in mind that pauses count as digits towards the 32-
digit maximum.
To add pauses to a Contacts entry number, do the following:
Find the Contacts entry associated with the number you want to include
1.
one or more pauses. See "Finding a Contacts Entry" on page 51 for more
information.
Select and edit the desired number. See "Editing a Contacts Entry" on page
2.
54 for more information.
Press the Options (right) soft key (
3.
appear in the display:
• Wait — A hard pause (waits for input from you).
• 2-Sec Pause — A 2-second pause after which dialing resumes.
Use the navigation keys to highlight the pause option of your choice.
4.
Press the
5.
sequence.
When you're finished entering information, press the
6.
number to Contacts.
Pause Dial from Contacts
If you stored the number using 2-second pause(s), simply recall the
1.
number from Contacts.
If you stored the number using Wait(s), recall the number from Contacts
2.
and wait for the appropriate prompt from the dialed number.
Press
3.
Edit an Existing E-mail Address
Find the Contacts entry you want to edit. See "Finding a Contacts Entry" on
1.
page 51 for more information.
Use the navigation keys to highlight the desired Contacts entry, then press
2.
the Edit (left) soft key (
The Edit Contact screen appears in the display.
Use the navigation keys to highlight the E-Mail field.
3.
key to enter the highlighted pause into the number
to dial the number.
).
Editing a Contacts Entry
). The following pause options
Understanding Your Contacts
key to store the
55
Advertisement
Table of Contents
