Table of Contents
Advertisement
Menu functions
GSM 900/1800: the phone operates in the
combined GSM 900/1800 network.
GSM 1900: the phone operates in the GSM
1900 network. This option is only available in the
U.S.A.
UMTS: the phone operates in UMTS (3G
network) networks. You can get a higher speed
connection than on lower generation networks,
and use advanced data and information services,
such as video calls.
Connections
(Menu 9.6.3)
Use this menu to create and customise the profiles
containing the settings for connecting your phone to
the network. You need these settings to use the web
browser or send MMS messages or e-mails.
Your phone is set up by default for connecting
to the network. If you change the settings
without first checking with your service
provider, the web browser, MMS, and e-mail
features may not work properly.
Creating a profile
1. Press <New>. If a profile has already been
saved, press <Options> and select New.
2. Specify profile parameters:
•
Set name: enter a profile name.
•
Access name: enter the access point name
used for the address of the GPRS network
gateway.
74
•
Auth type: choose the type of
authentication used.
•
User ID: enter the server login ID.
•
Password: enter the server password.
•
Protocol: select the protocol from among
WAP, HTTP, and Other.
•
Home URL: enter the URL address of the
page to be used as your homepage.
•
Gateway address: (WAP only) enter the
gateway address of the proxy server.
•
Secure connection: (WAP only) turn the
secure mode on or off.
•
Proxy address/Port: (HTTP only) set the
proxy server address and port.
•
Linger time (sec.): set a time period after
which the network is disconnected if there
has been no new data traffic in that time.
•
Advanced settings: provide you with the
following options:
Static IP: specify if you want to manually
enter an IP address; see the Local phone IP
option. If you want the IP address to be
automatically assigned by the server, remove
the check mark.
Local phone IP: enter the IP address
obtained from the network operator, if you
checked the Static IP option.
Advertisement
Table of Contents
