Table of Contents
Advertisement
1. Press [
] to answer the call. The first call is
automatically put on hold.
2. Press <Swap> to switch between the calls.
3. Press <Options> and select Drop → Drop held
call to end the call on hold.
4. To end the current call, press [
Using the speakerphone feature
Use the speaker feature to talk and listen with the
phone a short distance away.
Press [Centre] and then <Yes> to activate the
speakerphone feature. Press [Centre] again to
switch back to the earpiece.
Using In-call options
Press <Options> to access the following options
during a call:
•
Loudspeaker/Loudspeaker off: turn on the
speakerphone feature or switch back to Normal
mode.
•
Switch to headset/Switch to phone: switch
the call to a Bluetooth headset or back to the
phone.
•
Mute/Unmute: switch off the phone's
microphone so that the other person on the
phone cannot hear you, or switch it back on.
•
Mute key tone/Unmute key tone: turn the
key tones off or on.
•
New call: make a new call.
•
•
•
].
•
•
•
•
•
•
•
Contacts: access the contact list.
Send text message: create a new SMS
message.
Send DTMF: send the DTMF (Dual tone multi-
frequency) tones as a group. The DTMF tones are
the tones used in phones for tone dialling,
sounding when you press the number keys. This
option is helpful for entering a password or an
account number when you call an automated
system, like a banking service.
Memo: create a memo.
Transfer: transfer the currently active call to a
caller on hold. The two callers can talk to each
other, but you are disconnected from the call.
Join: set up a multi-party call by adding a caller
on hold to a currently active call. You can include
up to 5 people on a multi-party call.
Split: have a private conversation with one
multi-party call participant. The other
participants can converse with each other. After
the private conversation, select Join to return
both all private participants to the multi-party
call.
Drop: disconnect the call currently on hold or
active call.
Drop call: disconnect one multi-party call
participant.
End call: disconnect the call currently on hold,
active call, or all calls.
27
Advertisement
Table of Contents
