Advertisement
2 | Turn on (arm) your intrusion system
You can turn on your intrusion system using different methods.
Do one of the following:
Enter your passcode and press [ENTER] to turn All On with a delay.
or
Use one of the available commands:
For All On (with delay): [CMD][1]
For All On, Instant: [CMD][1][1]
For Part On, Instant: [CMD][2]
For Part On (with delay): [CMD][3]
or
Use the menus. Begin by pressing [MENU] (B925F only) or by pressing
[CMD][8].
For All On: Go to [1] On/Off > [1] All On > [1] All On Delay.
For All On, Instant: Go to [1] On/Off > [1] All On > [2] All On Instant.
For Part On: Go to [1] On/Off > [2] Part On > [1] Part On Delay
For Part On, Instant: Go to [1] On/Off > [2] Part On > [2] Part On Instant.
The menu options also allow you to choose individual areas to turn on.
Open the All On or Part On menu, press [3] to open the Select menu,
and then use [NEXT] and [ENTER] to choose On Instant or On Delay and
the area to turn on.
or
On a B925F, press the [ALL] or [PART] key.
3 | Turn off (disarm) your intrusion system
You can turn off your system using different methods.
Do one of the following:
Enter your passcode.
or
Use the menus. Begin by pressing [MENU] (B925F only) or by
pressing [CMD][8].
For Turn Off: Go to [1] On/Off > [3] Off > [1] Off.
For Turn Off Select: Go to [1] On/Off > [3] Off > [2] Off Select. Then
use [NEXT] and [ENTER] to choose the area to turn off.
4 | Change your passcode
You can change your own passcode. Do one of the following:
Use the command:
[CMD][5][5], and then follow the prompts.
or
Begin by pressing [MENU] (B925F only) or by pressing [CMD][8].
Go to [4] Users > [1] Change Passcode, and then follow the prompts.
5 | Confi gure users
You can change passcodes for other users, and you can add, remove,
and replace keyfobs and cards.
5 .1 | Add users
Use the command or the menu to open the Add User option, and then
follow the prompts to confi gure the user's passcode, name, authority
level, keyfob (if desired), language (when applicable), and card (when
applicable).
Use the command:
[CMD][5][6]
or
Use the menus:
Begin by pressing [MENU] (B925F only) or by pressing [CMD][8].
Go to [4] Users > [2] Add User.
5.2 | Edit Users
Use the menu to open the Edit User option, and then follow the prompts
to confi gure the user's passcode, name, authority level, keyfob (if
desired), language (when applicable), and card (when applicable).
Use the menus:
Begin by pressing [MENU] (B925F only) or by pressing [CMD][8].
Go to [4] Users > [3] Edit User.
5.3 | Delete users
Use the command or the menu to open the Delete User option, and then
follow the prompts to delete the user.
Use the command:
[CMD][5][3]
or
Use the menus:
Begin by pressing [MENU] (B925F only) or by pressing [CMD][8].
Go to [4] Users > [4] Delete User.
6 | Fire keypad operation
The display and status indicators show your system's operation status.
The keypad sounder also indicates status.
6.1 | Fire Alarm operation
When a fi re alarm occurs, the Fire indicator lights, and the keypad emits
a pulsing high-pitched fi re tone. The tone sounds for the duration set
by your security company. The keypad shows the highest priority
alarm point, and lights the [PREV] and [NEXT] keys if additional
alarms exist. To view additional system or point troubles, press [NEXT]
repeatedly. Press [ACK] to acknowledge the alarm.
6.2 | Fire Trouble operation
When a trouble condition occurs (such as wiring for a point is cut or
AC power fails), the keypad sounder activates briefl y approximately
every six seconds. The Trouble indicator lights and the keypad shows
the highest priority trouble. Press [ACK] to acknowledge the trouble.
To view additional system or point troubles, press [NEXT] repeatedly.
Press [SILENCE] to silence the alarm.
6.3 | Fire Supervisory operation
When a supervisory condition occurs, the sounder activates briefl y
approximately every six seconds. The Supervisory indicator lights
and the keypad shows a fi re supervisory message. Press [ACK] to
acknowledge the supervisory condition. To view point supervisory
conditions, press [NEXT] repeatedly. Press [ACK] to acknowledge the
alarm.
6.4 | Alarm or Trouble Silence
To silence troubles, press [SILENCE] or [CMD][4] and enter your
passcode (if required).
6.5 | Reset detectors
To reset detectors, silence the alarms, and clear events in one step,
ress [RESET] and enter your passcode (if required). You can also use
the Menu to reset detectors. Notice! You can use [CMD][4][7] to reset
detectors, but not silence or clear events.
6.6 | Fire drills
To initiate a fi re drill, press and hold [DRILL] and enter your
passcode (if required).
7 | Shortcuts
You can access your shortcuts through the menu:
Begin by pressing [MENU] (B925F only) or by pressing [CMD][8].
Go to [6] Shortcuts and then use [NEXT] and [ENTER] to choose the
shortcut you wish to run.
8 | Keypad cleaning
Use a soft cloth and non-abrasive cleaning solution to clean your keypad
(for example, microfi ber cloth and eyeglass cleaner). Spray the cleaner
onto the cloth. Do not spray cleaners directly onto the keypad.
Copyright
This document is the intellectual property of Bosch Security
Systems, Inc. and is protected by copyright. All rights reserved.
Trademarks
All hardware and software product names used in this document are
likely to be registered trademarks and must be treated accordingly.
Fire Keypad
B925F/B926F
en User's Quick Reference Guide
Bosch Security Systems, Inc.
Bosch Sicherheitssysteme GmbH
130 Perinton Parkway
Robert-Bosch-Ring 5
Fairport, NY 14450
85630 Grasbrunn
USA
Germany
www.boschsecurity.com
© 2014 Bosch Security Systems, Inc.
F.01U.304.002 | 01 | 2014.12
Advertisement
