Lorex LNB3373 SERIES Quick Start Manual

Contents
• IP Bullet Camera*
• Mounting Screws x 3 / Drywall Anchors x 3*
• Mounting Template*
• Allen Key*
• Cat5e Ethernet Extension Cable*
* Per camera.
ATTENTION - It is recommended to connect the camera to the NVR or
an external PoE switch. If using a DC power adapter with the camera, a
REGULATED UL / CSA APPROVED power supply is REQUIRED for use with this
camera. Use of a non-regulated, non-conforming power supply can damage
this product and voids the warranty.
Warning/Caution
• Use the camera only with compatible Lorex NVRs. (Compatible with all
Lorex by FLIR HD NVRs, except for LNR200 and LNR300 Series.)
• Read this guide carefully and keep it for future reference
• Follow all instructions for safe use of the product and handle with care
• Do not disassemble the camera
• Do not point the camera directly towards the sun or a source of intense
light
• Periodic cleaning may be required. Use a damp cloth only. Do not use
harsh cleaners or aerosol cleaners

Installation Tips

• Point the camera where there is the least amount of obstructions (i.e. tree
branches)
• Install the camera in a location that is difficult for vandals to reach
• Secure cabling so that it is not exposed or easily cut
• Camera rated for outdoor use. Installation in a sheltered location
recommended
Dimensions
3.1"/80mm
2.8"/72mm
Resources
Visit us online for up-to-date software and complete
1
2 Search the model number of your product
3 Click on your product in the search results
4
8.4"/213mm
Copyright © 2016 Lorex Corporation
As our products are subject to continuous improvement, Lorex Corporation reserves the right to modify
product design, specifications and prices, without notice and without incurring any obligation. E&OE

Need Help?

instruction manuals
Vist www.lorextechnology.com
Click the Downloads tab
WEATHERPROOF HIGH DEFINITION
NIGHT VISION IP SECURITY CAMERA

Quick Start Guide

English Version 2.0
LNB3373 SERIES
LNB3373_SERIES_TRIFOLDQSG_EN_R2