Call Settings - Samsung SGHA877 User Manual

Call Settings

From Idle mode, touch
Adjusting the General Call Settings
1. Touch General and select from the following options:
• Show My Number: allows you to select how your caller ID is
handled when an outgoing call is initiated. This is what
others see on their Caller ID screen. This value can be
made blank if you do not wish your number displayed to
other users.
• Auto Reject: selects which numbers will be automatically sent to
voicemail based on a user-created list from within the Reject List.
• Call Answer: selects how your phone answers incoming calls.
Selections are: Green Key, Open Slide, Any Key, and Automatic
(Time - 1-5 seconds).
• Auto Reply: sets up an automatic text message that is sent to the
calling party when they call you.
– Touch either On or Off to activate/deactivate the function.
– If active (On), touch the Reply to Send field and use the onscreen
keypad/keyboard to enter an auto reply message.
68
➔ ➔
Settings Calls.
• Call Status Tones: allows you to activate an alert tone for one of
two available status categories. Touch an option to make your
selection and then touch
Options include:
– Call Connect Tone: allows you to activate an alert tone when the a
connection has been made.
– Minute Minder: allows you to activate an alert tone which sounds
every minute the call is active.
• Alerts on Call: activates an alert tone for new messages being
received during an active call. Touch
Press twice return to the previous Phone settings
2.
page.
Adjusting the Voice Call Settings
Touch Voice Call and select from the following options:
1.
• Call Forwarding: incoming calls are re-routed to a secondary
number that you specify. Select the condition for the call forward
action:
– Forward Always activates an automatic forward of all incoming calls
regardless of condition.
– Busy activates an forward function only when your number is currently
in use and the caller receives a busy signal.
– No Reply activates an automatic forward of all incoming calls after a
preset amount of time (5 seconds - 30 seconds).
to store your new selection.
Save
to store setting.
Save