Samsung SGH-zx10 Series User Manual page 146

Template.book Page 146 Wednesday, December 28, 2005 7:02 PM
•
Auth Type: select a connection type.
•
User ID: enter the user ID required to connect to the network.
•
Password: enter the password required to connect to the
network.
•
Protocol: select a web page format. Select HTTP, Other or
WAP.
•
Home URL: enter the address of your startup homepage.
When the default homepage displays, you can delete it by
pressing and holding the
•
Proxy Address/Gateway Address: enter the WAP Gateway
IP Address or HTTP Proxy IP Address required to connect to
the Internet.
Note: The Proxy Address/Gateway Address field is determined by your
Protocol selection.
•
Port: enter the Proxy port required to connect to the Internet.
Note:When you set HTTP in Protocol, Secure Connection will appear in the
display.
•
Secure Connection: allows you to turn the secure
connection type on or off.
•
Linger Time (Sec.): enter a time that will disconnect the
WAP browser if there is no activity.
•
Advanced Settings: allows you to enable and enter a Static
IP address, a Static DNS address or select a Traffic Class.
8. When you have finished, press the Save soft key or the
key.
146
key.