Connection - Sony XCL-CG510 Technical Manual

Connection

C-mount lens
Power supply
You can supply power to the camera module using the following methods.
Using the DIGITAL Interface connector
This unit supports the PoCL (Power over Camera Link) standard. By connecting a PoCL-compatible camera link cable to a PoCL-
compatible camera module interface board, you can power, control, and output images from the camera using a single cable.
Heat dissipation is required depending on the usage environment.
Using the DC power input connector
You can supply power via the DC power input connector using the power adapter.
Use DC-700/700CE which is the stable power source free from ripple or noise.
Heat dissipation
For heat dissipation, refer to When mounting the camera (see page 10).
Camera Link cable
Camera module
Camera cable
CCXC-12P02N
CCXC-12P05N
Tripod adaptor
CCXC-12P10N
VCT-333I
CCXC-12P25N
* If the camera module interface board for the camera supports PoCL, the
camera can be operated even if the items within the dashed line are not
connected.
Camera module interface board
Camera adaptor
DC-700/700CE
6
AC
TRIG
Internal signal
output