Table of Contents
Advertisement
•
PUK and PUK2 codes
Unblocking Key) code is required to change a blocked
PIN code. The PUK2 code is required to change a
blocked PIN2 code. If the codes are not supplied with
the SIM card, contact the operator whose SIM card is
in your phone for the codes.
You can change the following codes in the
menu: lock code, PIN code, and PIN2 code. These
SIM
codes can only include numbers from
: Avoid using access codes similar to emergency
Note
numbers, such as 112, to prevent accidental dialling of
the emergency number.
•
PIN code request
active, the code is requested each time the phone is
switched on. Note that deactivating the PIN code
request may not be allowed by some SIM cards.
•
/
PIN code
PIN2 code
you want to change the codes.
•
Autolock period
time-out after which the phone is automatically locked
and can be used only if the correct lock code is
entered. Select the length of the time-out from 15
sec, 30 sec, 1 min, and 2 min, or
autolock period.
:
Notes
• When the phone is locked, you may be able to call the
emergency number programmed into your phone (e.g., 112
or other official emergency numbers).
• To lock the phone manually, press
commands, select
(
): The PUK (PIN
8 digits
: When the PIN code request is
/
Lock code
: You can set an autolock period, a
.
Lock phone
Phone and
to
.
0
9
: Open these settings if
to turn off the
None
. From the list of
Settings
247
Advertisement
Table of Contents
