Table of Contents
Advertisement
VoiceSignal
VoiceSignal
To start VoiceSignal 2.0, press the
key on the right hand
side of your phone.
VoiceSignal prompts you to "Say a command" and
displays the available commands at the bottom of the
screen.
Note: When you first start VoiceSignal, it voice-activates the names stored
in your contact list. While reading your contacts, VoiceSignal displays the
following message: Please wait while VoiceSignal voice-activates your
contacts.
You can change VoiceSignal settings by starting
VoiceSignal and then selecting the "Settings" soft key. See
the appendix "VoiceSignal Settings" for a description of
the settings you can change.
Calling a Name or Number
Use the Call command to place a call. If the number you
want to call is stored in your contact list, you can say the
contact name and, optionally, which number (home,
mobile, etc.) you want to call. If the number is not in your
contact list, you can say the number itself.
Section 3: Call Functions
49
Advertisement
Table of Contents
