VoiceSignal™
VoiceSignal is advanced speech recognition software that
can be used to activate a wide-variety of functions on your
Pocket PC. VoiceSignal software automatically voice
activates all numbers in your Contacts for voice dialing or
searching, and no pre-recording or training is needed.
VoiceSignal commands allow you to dial numbers,
lookup contact information, and open applications using
your voice. Simply say a command at the prompt to open
your contacts, launcher, the Picsel Browser, and more.
1. In standby mode, press and hold the
side of your phone.
2. After a brief pause, "Say a Command" appears in the
display and is pronounced through the speaker.
3. After the phone beeps, say the name of the command
that you want to perform. The VoiceSignal commands
are:
•
Call: Lets you dial a phone number by saying a name saved in
your contact list or by saying the digits in the telephone
number.
•
Lookup: Lets you retrieve contact information for any entry in
your contacts list.
•
Open: This provides you with one-step access to many of your
phone's applications such as Calendar.
The following sections provide more information about
the VoiceSignal commands.
38
key on the right