Table of Contents
Advertisement
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Settings. Highlight Connection Settings and
press the Select soft key or the
3. Select the profile you wan t.
For each profile, the following options are available:
Profile Name — enter a name that you wish to assign to the
HTTP proxy server.
Home URL — set the address of your startup homepage.
When the default homepage displays, you can delete it using
the
key and enter your own choice.
Proxy — place a check in the box to use the proxy server.
IP Address — enter the IP address of the proxy server.
Port — enter a port number or use default setting.
DNS
DNS1 — enter the primary DNS (Domain Name System)
address.
DNS2 — enter the secondary DNS address.
Bearer — select the bearer to be used for each type of
network address accessed: GPRS or GSM. The remaining
options depend on the Bearer setting.
When the bearer is set to GPRS:
APN — enter the access point name used for the address of
the GPRS network gateway.
Login ID — enter the User ID required to connect to the GPRS
network.
Password — enter the password required to connect to the
GPRS network.
Clearing the Cache
key.
Section 10: WAP
169
Advertisement
Table of Contents
