Table of Contents
Advertisement
Note: Your phone connects to the network by default. If you change the
MMS settings without first checking with your service provider, the WAP,
MMS features may not work properly.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Settings and highlight Connection Settings.
Press the Select soft key or the
3. Select the profile you want to change.
For each profile, the following options are available:
Profile Name — enter a name that you wish to assign to the
profile.
Home URL — enter the address of the WAP homepage of
your service provider.
Proxy — place a check in the box to use the proxy server.
IP Address — enter the IP address of the proxy server.
Port — enter a port number or use default setting.
DNS
DNS1 — enter the primary DNS (Domain Name System)
address.
DNS2 — enter the secondary DNS address.
Bearer — select the network bearer type for data
transmission, either GPRS or GSM.
Advance Settings
APN — enter the access point name used for the address
of the network.
Login ID — enter the user ID required to connect to the
network.
Password — enter the password required to connect to
the network.
118
key.
Advertisement
Table of Contents
