Editing A Contacts Entry - Samsung SCH-r210 Series User Manual

Editing a Contacts Entry

Editing Contacts Name and Numbers
Find the Contacts entry you wish to change. (For more
1.
information, refer to "Finding a Contacts Entry" on
page 29.)
Use the Navigation key to highlight the entry and press
2.
VIEW ( ). The View Contact screen appears in the
display showing the highlighted entry's information.
Use the Navigation key to review the information for the
3.
entry that you wish to change, then press EDIT (
Edit Contact screen appears in the display.
Use the Navigation key to highlight the particular
4.
information you want to add or change.
• Press to backspace and delete numbers or letters.
• Press and hold to clear all numbers or letters in the highlighted
field.
• Press the Options soft key.
The following options pop-up in the display:
– Set Speed Dial / Remove Speed Dial — Assign/remove a speed dial
number. (For more information, refer to "Speed Dial" on page 35.)
– Set as default — Set the number the phone will dial when Contacts
dialing or speed dialing.
– Wait — A hard pause (waits for input from you).
– 2-Sec Pause — A 2-second pause after which dialing resumes. (For
more information, refer to "Add Pauses to Contacts Numbers"
on page 32.)
Select the desired option.
When you're finished changing the Contacts entry:
5.
• To save your changes, press
• To discard your changes, press
exiting without saving your changes. Press the Yes soft key to
discard your changes.
Add Pauses to Contacts Numbers
Calls to automated systems such as banking services often
). The
require a password or account number. Instead of manually
entering these numbers, you can store them in a Contacts entry
with the phone number and with special characters called
pauses, up to a maximum of 32 digits.
Wait — Stops the calling sequence until the phone receives further
•
input.
2-Sec Pause — Stops the calling sequence for two seconds, then
•
sends the remaining digits.
Note: You can enter multiple Waits to extend the length of a pause. For
example, two consecutive Waits cause a total pause time of four
seconds. Keep in mind that pauses count as digits towards the 32-digit
maximum.
.
. You are prompted to confirm
Understanding Your Contacts 32