Samsung SCH-r210 Series User Manual page 17

To exit Silent Mode:
While in Silent mode and standby mode, press and hold
. "Exit Silent Mode" briefly appears in the display and
your phone returns to standby mode.
Vibrate Mode
While in Vibrate Mode, your phone does not ring to indicate
incoming calls or alarms, it vibrates instead.
To enter Vibrate Mode:
In standby mode, repeatedly press the Volume key
( ) down until "Vibrate" appears in the display.
Note: The Volume key is on the left side of phone.
Adjust the Ringer
In standby mode, press
In standby mode, press
1.
ringer volume as desired.
up or down.
up or down to set the call
Options are:
• Ringer Off
• Vibrate
• Low
• Low/Medium
When you are satisfied with the setting, press SET. Your phone
returns to standby mode.
You can also enter the Volume > Voice Calls sub-menu by
pressing MENU ( ), then selecting
➔ ➔
Settings Volume Voice Calls. Use the Volume key (
on the left side of your phone to adjust the ringer volume setting.
The Vibrate icon ( ) appears in the display when the phone is
in Vibrate mode. The Vibrate/Ring icon (
display when the phone is in Vibrate/High mode.
• Medium
• Medium/High
• High
• Vibrate/High
➔ ➔
Settings Sound
) appears in the
Understanding Your Phone
)
14