Table of Contents
Advertisement
Answer Mode
This menu option allows you to select an answer mode when
an incoming call comes. It is preset to By Opening.
The following options are available:
By Opening: The phone answers when you open the folder.
By Any Key Ans: The phone answers when you press any
key except
key.
By Send: The phone answers when you press
Tone Length
Some phones you call can recognize only longer tones. You
may have to change the length to LONG for some calls. When
calling a paging system, your phone should be in the SHORT
mode.
Tone
Release Tone: You can set your phone to sound the release
tone when a call is disconnected or dropped.
Connect Tone: You can set your phone to sound the connect
tone when your call is connected to the
system.
54
Setup
Set Time
Menu 7-4
The option enables you to set the current date and time. Enter
the time and date.
The current time, if set, displays. The month, day, hour and
minute must be entered with 2 digits. The year requires all
four digits. If you do not input the time or you input the wrong
time, Invalid Time displays.
key.
In Data/Fax
Menu 7-5
To send or receive data or fax through the phone, you have to
set this option to Incoming Data Only or Incoming Fax
Only. When you want to use the phone for a normal voice
call, set to Off: Voice Call Only.
The following options are available:
Off: Voice Call Only: receives a call.
Incoming Data Only: receives or sends data.
Incoming Fax Only: receives or sends fax.
Menu 7-6
Analog Call
Your phone is preset to Digital mode. If you want to place a
call in Analog mode, use this menu. But if your system
supplier does not provide AMPS service, this feature is
unavailable.
If you end the Analog call, your phone returns to Digital mode
automatically.
Menu 7-7
Menu 7-8
Menu 7-9
55
Setup
Advertisement
Table of Contents
