Voice Services
Voice Recognition
Voice recognition allows you to say commands to perform common
functions supported by your phone. You simply say the pre-
designated command displayed on your screen in a normal tone of
voice to perform the desired function.
To activate voice recognition:
1. Press and hold
voice command.)
2. Wait for the beep and then say one of the following
commands:
•
Voice Dial
•
Contacts
When it recognizes one of these commands, the phone launches the
associated application. If the phone does not hear a command
within approximately eight seconds, it de-activates voice recognition
without taking any action.
Note
:
If you want to use another button to activate voice recognition, in
addition to
, press the
button assignments, including the button used to launch "Voice Dial,"
which is the voice recognition application.
Using Voice Dial
Voice Dial allows you to dial any valid 7, 10 or 11 digit North
American phone number by speaking the number naturally, without
pausing between the digits.
. (The phone prompts you to say a
•
Voice Memo
•
Status
left softkey
Shortcuts
for
. Though this menu, you can change
•
Calendar
Menu
for
, followed by
Voice Services 29