While in 123 mode, press the key containing the corresponding
number that you wish to insert into your message.
Entering Symbols
Symbol mode enables you to enter symbols such as @ or % in a
text message.
In standby mode, press the Message (right) soft key (
1.
then press
(for Send Message) and
Message to compose a new text message.
2.
Enter the phone number of the recipient, then press the
key.
Press the Left soft key (
3.
following options appears in the display:
• T9 Word
• Abc
• ABC
• 123
• Symbols
• Add T9 Word
Use the Up and Down navigation keys to highlight Symbols,
4.
then press the
symbols appears in the display.
37
for Text
). A pop-up menu containing the
key. The first of three screens of
Use the Prev (left) soft key (
5.
key (
) to page through the other symbols, if necessary.
Press the key that corresponds with the symbol that you
6.
wish to enter. For example, press
point (!).
),
Note: You can also use the navigation keys to highlight the desired symbol
and then press the
message.
Repeat steps 3 through 6 to insert as many symbols into
7.
your message as desired.
) and the Next (right) soft
for an exclamation
key to enter the selected symbol into your