Table of Contents
Advertisement
Dialing From Contacts
To dial directly from a Contact entry:
1.
Press
2.
Enter the first few letters of the Contact name using the
numeric keypad.
3.
The matching contact is automatically highlighted.
4.
Press
Note:
If the desired entry contains more than one phone number, scroll up
or down to highlight the number you wish to call and press TALK to make
the call.
Using One-Touch/Two-Touch Speed Dialing
You can store up to 99 numbers in your phone's speed dial memory
to make contacting friends and family as easy as pressing a few
buttons. With this feature, you can dial Speed Dial entries using one
key press for locations 1-9 or two key presses for locations 10-99.
To use One-Touch Dialing for Speed Dial locations 1-9:
Press and hold the appropriate key for approximately two
seconds. (The display confirms that the number has been
dialed when it shows "Calling...".)
To use Two-Touch Dialing for Speed Dial locations 10-99:
1.
Press the first digit.
2.
Press and hold the second digit for approximately two seconds.
(The display confirms that the number has been dialed when it
shows "Calling...".)
Note:
Speed dialing is not available when you are roaming; when you are
roaming off the Sprint PCS Nationwide Network, you must always dial
using eleven digits (1 + area code + number).
Section 2A: Your PCS Vision Phone - The Basics
to display your Contacts Find menu.
to make the call.
29
Advertisement
Table of Contents
