Enter numbers while in 123 mode by pressing the key
2.
labeled with the corresponding number that you wish to
insert into your message.
Entering Symbols
Enter symbols such as "@" or "%" into a text message.
While composing a text message, enter symbols by using
one of following keypads:
• Using the QWERTY keypad:
– Press
until "123" appears in the lower left corner of the display.
– Press the key(s) labeled with the corresponding symbol(s) that you wish
to insert into your message.
• Using the phone keypad:
– Press the Left soft key, then select Symbols. The first of three symbol
screens appears in the display.
– Use the Left and Right soft keys to page through the other symbols, if
desired.
– Press the key that corresponds with the symbol that you wish to enter.
For example, press
– Repeat these steps to insert additional symbols into your message.
for an exclamation point (!).
Entering Text
36