Samsung Messager SCH-r450 Series User Manual page 25

Press the number key representing the second digit of the
2.
desired Contact's speed dial number.
Press and hold the number key representing the third digit
3.
of the desired Contact's speed dial number.
Example: To speed dial the Contacts entry assigned to speed dial 325, press
or , press
.
Voice Dialing
The voice recognition capabilities of your SCH-r450 are
exceptional due to advanced, speaker-independent technology.
This means you do not need to "train" your phone to understand
your voice. You can use your voice in a natural manner to dial
numbers.
Note: End Calls Before relaunching the VoiceSignal voice recognition
software — When you use Voice Dialing to make a call, you must end
that call before you can use other Voice Commands. See "Voice SVC"
on page 70 for more information.
Use the Call command to dial any number stored in your
Contacts list by saying the name of the contact (Name Dialing).
You can also use Call to dial any telephone number, even
numbers not stored in your contact list, by speaking the
individual digits in the number (Digit Dialing).
or , then press and hold
Voice Dialing Tips:
Wait for the beep before speaking.
•
Speak clearly at a normal volume, as if you were talking to someone
•
on the phone.
When saying a name, say the first name then the last name.
•
Dialing a Name
or
To dial a name, do the following:
In standby mode, press and hold
1.
"Say a Command" appears in the display and is
pronounced through the earpiece.
Say, "Call".
2.
You are prompted to "Say the name or number".
Speak clearly and say the name of a person in your
3.
Contacts list, first name followed by last name.
If the name is recognized, Voice Dial repeats the name and
dials the number.
If Voice Dial is not sure which name you said, it displays a
choice list of up to three names and prompts you with "Did
you say?" followed by the first name on the list.
or .
Call Functions 22