Table of Contents
Advertisement
ActiveSync Connection and Setup
Your computer can assign a different profile to each
device that is connected to it via the ActiveSync
application. Once you connect your first Intrepid device,
it will show up within the
Note
If the device is connected to a computer without
Outlook, the entry appears as SPH-i350 .
When the device is connected to a computer with
Outlook, the entry appears as the name of your
Outlook profile.
1.
Right-click the ActiveSync icon (
computer's taskbar and select the
option.
Settings...
2.
Make sure the following options are checked and
click
:
OK
Allow USB Connections
Open ActiveSync when my device connects
3.
Connect one end of the USB data cable (included
with your device) into the USB port on your
computer.
menu.
File > Mobile Devices
) in your
Connection
4.
Connect the other end into the charger/accesory
jack. (The Synchronization Setup Wizard will
launch on your computer and prompt you to set
up a sync partnership with the device.)
Important
It is recommended that if you wish to set up
Outlook Email (via a Microsoft Exchange
Server), you do so wirelessly by using the
device's pre-installed ActiveSync application
(
> ActiveSync ).
Incorrect
2G. Synchronizing With Your Computer
Correct
103
Advertisement
Table of Contents
