Hamilton Beach 53601C Manual page 10

How to Remove and Replace Quiet Shield
1. TO REMOVE: Start with front
shield; separate front shield
from back at rubber hinges.
1. TO REPLACE: Press both
shield locking buttons in
while sliding back shield
around the base.
10
2. Press tabs on both sides of
the blender while moving
back shield back with your
thumbs.
2. To secure, press back shield
and blender base together.
3. Slide back shield away from
blender base.
3. Pull front shield around rear
shield.
4. Secure round hinges of front
shield around rubber hinges.