Table of Contents
Advertisement
1D. Contacts
Adding a New Contacts Entry (page 28)
Saving a Phone Number (page 29)
Contacts Entry Options (page 29)
Assigning Speed Dial Numbers (page 30)
Selecting a Ringer Type for an Entry (page 30)
Adding a New Contacts Entry
The number of Contacts entries you can store in your
device is limited only by available memory space. Each
entry can contain up to nine phone numbers, three
email addresses, and one Web address. Contacts
names may contain up to 70 characters.
1.
Press
> Contacts > New
Contact
.
28
1D. Contacts
(left softkey)
> Outlook
Shortcut
Enter the phone number in standby mode
and press Menu (right softkey) > Save to
Contacts . Proceed with "Saving a Phone
Number" on page 29.
2.
Enter a name for the new entry and press the
navigation key down.
3.
Enter the phone number(s) for the entry.
4.
Press
to store the new Contacts entry.
After saving the number, your device displays the new
entry. (See "Contacts Entry Options" on page 29.)
Tip
ICE – In Case of Emergency
To make it easier for emergency personnel to identify
important contacts, you can list your local
emergency contacts under "ICE" in your device's
Contacts list. For example, if your mother is your
primary emergency contact, list her as "ICE–Mom" in
your Contacts. To list more than one emergency
contact, use "ICE1–___," "ICE2–___," etc.
Advertisement
Table of Contents
