Performing An Ir Hotsync ® Operation - Samsung i500 Online User's Manual

Note:
The HotSync Manager is now communicating with the simulated
port defined for infrared communication. This means that you cannot use
your cradle again until you reconfigure the HotSync Manager to
communicate with the port defined for cradle synchronization.
Performing an IR HotSync
After you complete the steps to prepare for performing an IR HotSync
operation, it is easy to perform the actual operation.
To perform an IR HotSync operation:
Tap the Applications Launcher icon
1.
Tap the HotSync icon
2.
Tap
3. Local
Tap the drop down menu below the HotSync icon and select
4.
PC/Handheld
Position the IR port of your handheld within a couple of inches of
5.
the infrared port of your computer.
Tap the
6. HotSync
Returning to cradle HotSync operations
If needed, connect the cradle to a serial (COM) port of your
1.
computer.
Click the HotSync Manager icon in the Windows system tray.
2.
Choose
3. Setup
Select the COM port where your cradle is connected.
4.
Click .
5. OK
.
.
.
icon to start the IR HotSync operation.
, and then click
Section 2: Understanding Your Phone
®
Operation
.
.
Local
2Q: HotSync Operations 161
IR to a