Morphy Richards Supreme Precision 10 in 1 Multicooker Instructions Manual page 17

562000 Rev2.qxp_Layout 1 19/01/2015 09:24 Page 17
Press the Temperature Button (28), the Icon
(31) will flash. Use the Increase and Decrease
Buttons to adjust the temperature in celsius
to 100°C.
Press the Start Button (24). Your Multicooker
will sound and begin the cooking process.
When finished, your Multicooker will sound
and display 'END', Press the Stop Button
(30). Your Multicooker will slow to speed 1
and continue mixing to prevent food from
sticking to the base of the Jug.
5
Press the Timer Button
half of the Timer
Increase and Decrease Buttons to adjust the
timer in minutes. Press the Timer Button
again, the second half of the Icon will flash,
use the Increase and Decrease buttons to
adjust the timer in seconds. You can use your
Multicooker without setting the timer for a
maximum of 30 minutes.
7
If required, during stewing, remove the Lid to
boil off any excess liquid. With the Lid
removed your Multicooker will not stir, so you
will need to stir manually using a plastic
spatula to prevent food sticking to the Jug.
9
Remove the Lid by twisting anticlockwise and
then lifting away from the Jug. Angle the Lid
away from you when lifting, the contents will
be hot. Allow the water collected on the
inside of the Lid to fall back into the Jug, to
avoid drips onto your Multicooker. Carefully
remove the Blade or Paddle from the Jug (if
using). WARNING HOT STEAM
(27) (if using), the first
(32) will flash. Use the
8
10
6
17