Replacing The Rear-I/O Cover; Procedure - Dell Alienware 17 R5 Service Manual

Replacing the rear-I/O cover

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.

Procedure

1 Align the tabs on the rear-I/O cover with the slots on the computer base and
snap the rear-I/O cover into place.
2 Replace the two screws (M2.5x7) that secure the rear-I/O cover to the palm-
rest assembly.
computer. After working inside your
After working inside your computer.
41