Opening And Closing The Windows - Honda Jazz 2018 Owner's Manual

18 FIT JAZZ-32T5A6100.book 162 ページ ２０１７年８月２３日 水曜日 午前１１時２４分

Opening and Closing the Windows

Opening/Closing the Power Windows
The power windows can be opened and closed when the ignition switch is in ON
*1 , using the switches on the doors.
( w
The driver's side switches can be used to open and close all of the windows.
The power window lock button on the driver's side must be switched off (not
pushed in, indicator off) to open and close the windows from anywhere other than
the driver's seat.
When the power window lock button is pushed in, the indicator comes on and you
can only operate the driver's window. Turn the power window lock button on if a
child is in the vehicle.
■
Opening/Closing Windows with Auto-Open/Close Function
Driver's
Power Window
Window Lock Button
Switch
Indicator
Front Passenger's
Window Switch
(Auto Function * )
*1 : Models with the keyless access system have an ENGINE START/STOP button instead of an ignition
switch.
* Not available on all models
162
■
Manual operation
To open: Push the switch down lightly, and
hold it until the desired position is reached.
To close: Pull the switch up lightly, and hold it
until the desired position is reached.
■
On
Automatic operation
To open: Push the switch down firmly.
Off
To close: Pull the switch up firmly.
The window opens or closes completely. To
stop the window at any time, push or pull the
switch briefly.
1Opening/Closing the Power Windows
WARNING
3
Closing a power window on someone's
hands or fingers can cause serious injury.
Make sure your passengers are away from
the windows before closing them.
WARNING: Always take the ignition key with you
whenever you leave the vehicle alone or with other
occupants.
The power windows can be operated for up to 10
minutes after you turn the ignition switch to LOCK
*1 .
( 0
Opening either front door cancels this function.
Auto Reverse
If a power window senses resistance when closing
automatically, it will stop closing and reverse direction.
The driver's window auto reverse function is disabled
when you continuously pull up the switch.
The auto reverse function stops sensing when the
window is almost closed to ensure that it fully closes.