LG 42VS20 User Manual page 70

41. Tile V Position (Command: d f)
To set the Vertical Position.
Transmission
[d][f][ ][Set ID][ ][Data][Cr]
Data 23 to 41: Bottom Max(-15) to Top Max(15)
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
42. Tile H Size (Command: d g)
To set the Horizontal size.
Transmission
[d][g][ ][Set ID][ ][Data][x]
Data 00 to 64: Min(-50) to Max(50)
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
43. Tile V Size (Command: d h)
To set the Tile Vertical size.
Transmission
[d][h][ ][Set ID][ ][Data][x]
Data 00 to 32: 0 to 50
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
EXTERNAL CONTROL DEVICE SETUP
44. Natural Mode (In Tile Mode) (Comman : d j)
To assign the Tile Natural mode for Tiling
Transmission
[d][j][ ][Set ID][ ][Data][x]
Data 00: Off
01: On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
45. Fail Over Select (Command: m i)
To set the Fail Over function.
Transmission
[m][i][ ][Set ID][ ][Data][x]
Data 00: Fail Over Off
01: Fail Over On
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
46. DPM Select (Command: f j)
To set the DPM (Display Power Management)
function.
Transmission
[f][j][ ][Set ID][ ][Data][x]
Data 00: DPM Select Off
01: DPM Select On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
69